[Twisted-Python] App design / Twisted Logging?

Paul Campbell paul at ref.nmedia.net
Sat Mar 12 21:49:31 MST 2005


> >> -> Do I need a thread for every copy/move operation (large 
> >files via network)?
> >
> >Nope. That's the beauty of twisted code. I've written this 
> >sort of handling
> >multiple packet trains many times. Write a protocol.
> 
> Hm, sounds like using FTP and not shutil.move via system's SMB?
> Or is there already something better in twisted?
> 
> If I'd write my own protocol to wrap shutil.move,
> the operation would be blocking because I don't
> work on file block level and the protocol doesn't make sense.
> I'm not feeling like writing file transfer code on file block level.
> Or do you think it would be worth the hassle?

It is so darned easy to write your own protocols that there's really not
much point in reusing like you are attempting to do. Here's a simple
example:

from twisted.internet.protocol import Protocol, ClientFactory
from sys import stdout
from string import unpack

class FileXferProtocol(Protocol):
    """Handles receiving files. Fire off via the factory."""
    def dataReceived(self, data):
        if not hasattr(self, "filesize"):
            # First block of the file; get the final size
            self.filesize = unpack("!L", data[:4])
            data = data[4:]

        # Receiving blocks of the file
        self.openfile.write(data)
        self.recvdlen += len(data)
        if self.recvdlen == self.filesize:
            self.openfile.close()
            self.transport.loseConnection()
        return

class FileXferFactory(ClientFactory):
    """Creates protocols to receive files"""
    protocol = FileXferProtocol

    def __init__(self, filename):
        self.filename = filename
        self.openfile = file(filename)

if __name__ == '__main__':
    # First, create the factory protocol and initialize it
    f = FileXferFactory("tempfile")
    # Second, connect to a server to get a file (127.0.0.1:9999 in this case)
    reactor.connectTCP("127.0.0.1", 9999, f)
    reactor.run() # Call the reactor

You could get hung up on worrying about blocks and reassembly and whatnot
(and I have done so in the past), but why bother? About the only thing
necessary here is to install some sort of error checking. In the factory
code it might be appropriate to do some error checking (make sure the entire
file was received) and then to call the next piece of code (the file handler).

On the server side, simply read some bytes and shovel it onto the port. It
would look something like this:

class fileXferSend(Protocol):
    """Sends files"""
    def connectionMade(self):
        # The factory already set this up with a file to send
        self.openfile = open(self.filename)
        # Somewhat braindead code because the standard object won't give length
        self.openfile.seek(0,2)
        self.length = self.openfile.tell()
        # Start over
        self.openfile.seek(0, 0)
        block = self.openfile.read(500) # Prime the system
        self.transport.write(pack("!L", self.length) + block)
        reactor.callLater(0, self.sendBlocks)
    def sendBlocks(self):
        # Keep sending out blocks of the file until it is done
        block = self.openfile.read(1000)
        if len(block): # Keep repeating as long as there is data
            self.transport.write(block)
            reactor.callLater(0, self.sendBlocks)
        else:
            self.openfile.close()
        return

This works very easily because TCP already handles packet assembly and
ordering and checksums on all the blocks. So all you have to do is shovel
the data across the network. At least theoretically, you don't even have to
keep track of file length. Also, you could alternatively simply prepend a
byte at the beginning of the file. The byte could be say "C" for a
continuation or "E" for "eof of file". The code would work almost the
same. Or you could be very careful about monitoring the error codes that
come out of connectionLost to be sure whether it was a "normal" session
close from the host or a dropped session (error), and don't bother
implementing ANY sort of "find the end of the file" stuff.

> So not using DOM but per-line XML handling.
> Not that convenient, because I use only small bits
> of all the XML data that are spread all over the files,
> but I guess it would become better twisted code.

Perhaps. I'm not really familiar with minidom all that well. The above
code contains a perfect example of what I mean. If I had set the parameter
in the file.read() command to -1 or omitted it, then the .read() function
would have dumped the entire file into a string. Although this may have
serious memory implications, the basic problem is that it will also block
twisted while it is reading the entire file into memory. Instead, the above
code reads a chunk of file, sends a packet, and then returns to the reactor
in a short loop (reactor.callLater(0, ...)) which allows the reactor to
intersperse calls with other events.

> That's perhaps a general problem with twisted: There are great
> solutions for everything, but you need to know them in detail
> to know which fits your problem. Or you must know how you should
> reshape your problem to fit in some twisted solution...

Did you ever notice the same problem with basically every other framework
out there? I suggested that you read up on flows for a specific reason.
Flows allow you to do what you are suggesting in a very twisted way...you
can sequence your XML procedure so that you break it up into short bits of
execution that by themselves are effectively non-blocking. That is the
"twisted way". Flows let you manage this situation when you have a full
blown state machine, not just a linear sequence of steps. BUT, the 
documentation for Flows and Deferred's is really good at explaining how
to break your code up into small non-blocking pieces. So I wasn't really
pushing you to USE the Flows module, but to use the concepts that are in
it (just read the introductory parts to get the idea).


> I know twisted "does it all"(TM), but was is "it"? ;-)

That is the trouble with frameworks. WxWidgets is one of the best GUI
frameworks available that works well with Python (via wxPython). But
interestingly enough, wxWidgets includes it's own sockets library! However,
before you ask, it is not easy to get wxPython (and wxWidgets) to play well
with twisted. It is also reactor based, but unlike Python, the reactor in
wxWidgets is very unfriendly to all other reactor-based systems.

> I'm just trying to write a simple directory watcher (I need
> this at every corner of my app), Patrick Lauber wrote an answer
> to my initial question on that, but that wasn't really what I needed.
>
> It works so far that it calls a deferred callback if it gets a
> notify on a new/changed file, but only once; next time I get an
> "AlreadyCalledError" - looks like I don't yet understand deferreds.

Common error. A deferred is a promise to call back at some time in the
future, but only once (no more, no less)! Quite often,
reactor.callLater(0, xxx) is what you
want to do. On the face of it, reactor.callLater() appears to be a timer
mechanism. But what happens if you call it with the twisted idiom
reactor.callLater(0, function, parameters)?

This is a very common twisted idiom. What it does is schedule another
function to run immediately when the reactor is allowed to schedule (assuming
that there aren't several more functions that are already ready to run...
otherwise it waits in line). And (subject to buffer limits on pending calls),
you can call a function via the reactor as many times as you want.

Otherwise, your code can call back again and receive another
deferred, and eventually another callback. Also, you may be looking instead
for "deferredList". For instance, let's say that you are processing a list
of files in parallel. In threading-based code, you'd fire off a thread for
each file and then wait for each one to return (or perhaps never wait). In
deferred's, you'd do something similar:

dlist = list()
for i in filelist:
    dlist.append(handleFile(i) # handleFile returns a deferred
return defer.deferredList(dlist)

This routine will return a single Deferred, but the callback results will be
a list of the results (and their errback/callback status) from ALL of the
handleFile() calls.

> At the moment it's inherited from pb.Root, because I'll need it to
> run remotely sometimes, but perhaps it would be better to use a
> service or something else -- it should run "all the time" if not
> stopped and call a callback for every file.
> I attached the file, perhaps someone can point out my biggest mistakes?

pb is useful if you intend on using the Perspective Broker in the future
for twisted's own version of RPC's. If not, it is probably wise to stay
away. PB makes it very easy to refactor your code into PB form later on
if you so desire. My only problem with it is that you REALLY need to
control both ends of the pipe and you have to live within the limitations
of TCP/IP (a big limit in the certain P2P code which is better off with
very light weight RPC's).

> >first but once you get used to it, deferred's seem just well...obvious.
> 
> I hope to get into that higher state of mind soon. ;-)

Everywhere that you anticipate your code blocking on a procedure call,
the code itself needs to return a deferred early on (before it blocks). Then
later on, it uses the deferred to pass a result. Frequently, you will have
bits of code that read something like this:

d = defer.Deferred()
reactor.callLater(0.00001, nextStep, d)
return d

def nextStep(d):
    ...does something...
    d.callback(real return)

Then the caller commonly does something like:
state.x = <state is a utility class to pass around function state>
d=callDeferredCode(xxx)
d.addcallback(responseHandler, state)
return

def responseHandler(response, state):
    ...

This totally decouples the two routines. Essentially, the calling function
and the called function coordinate an orderly shutdown of the calling
function's code. Then the callee goes about it's business of running some
lengthy function (perhaps waiting on network transmissions) before finally
returning with a value in hand. The caller then picks up via the second
function and the saved state.

This pattern is a bit ugly but at least it is reasonably readable and it
gets around so many ugly details. Once you've written a couple of these,
you'll start to think about when and where and how to place the deferred
and reactor.callLater calls appropriately. At first, it's just a bit of
a challenge wrapping your head around the concept of continuations.

Oh...and the state thing...this gets mentioned once in a while and once
you use it, it is highly intuitive but new users frequently miss the
concept. First, create a "utility class":

class Utility:
    pass

What good is an empty class? Plenty! Within a class, you can always use
the self object for this. But outside of that, use the utility class as
a temporary storage bin with named slots. By this I mean,

state = Utility()

state.filename = "the file I don't want to forget about"
state.status = "The number I'll need later"


Also one other thing...once you create a deferred (defer.Deferred), you
can chain off of it as much as you want in both the caller and callee.
For instance, the callee may not bother creating the deferred but may instead
make calls to a deeper function and simply addCallback() before returning
the SAME deferred variable to the caller. Then when the deferred actually
fires, it can pre-proces the returned results before returning them to the
top-level caller.

Clear as much, right? Well, this situation happens for instance if you have
a function to clean up/process the raw results from a network I/O call
before returning the answers to a higher level. For instance, if you are
writing your own RPC handler to use UDP packets (which I've done), the
lowest level is responsible for handling network I/O. The next level up
is responsible for detecting and handling retransmissions. The next level
up is responsible for splitting/concatenating data that is too big to
fit inside a single packet. And the next level up is responsible for doing
a version of pickle/unpickle. So that the higher level routines communicate
essentially with "rpcSend(method, param1, param2, param3...) calls while the
lower level routines completely obscure the details (and are in turn
obscured from the lower level details of the protocol).

> I enjoyed being able to switch the logging output, e.g. from file to
> database or email per config file without the need to go into the code.
> I don't feel like re-inventing the wheel, but as Glyph pointed out,
> the config syntax of standard logging is just ugly and messy; the
> config syntax of log4[j|perl|net] ist much more logical. Perhaps
> someone should write a log4twisted module...

More likely, just a log4python, with sufficient room that log4twisted doesn't
really require too much. For instance, log4python can use the .next() call
to iterate over log entries (when reading from it). twisted code will just
use this interface (instead of .dumpEntireLog) to sanely read the log in
chunks.




More information about the Twisted-Python mailing list