Writing Clients

  1. Overview
  2. Protocol
  3. Simple, single-use clients
  4. ClientFactory
  5. A Higher-Level Example: ircLogBot
  6. Further Reading

Overview

Twisted is a framework designed to be very flexible, and let you write powerful clients. The cost of this flexibility is a few layers in the way to writing your client. This document covers creating clients that can be used for TCP, SSL and Unix sockets. UDP is covered in a different document.

At the base, the place where you actually implement the protocol parsing and handling, is the Protocol class. This class will usually be descended from twisted.internet.protocol.Protocol. Most protocol handlers inherit either from this class or from one of its convenience children. An instance of the protocol class will be instantiated when you connect to the server and will go away when the connection is finished. This means that persistent configuration is not saved in the Protocol.

The persistent configuration is kept in a Factory class, which usually inherits from twisted.internet.protocol.Factory (or twisted.internet.protocol.ClientFactory: see below). The default factory class just instantiates the Protocol and then sets the protocol's factory attribute to point to itself (the factory). This lets the Protocol access, and possibly modify, the persistent configuration.

Protocol

As mentioned above, this and auxiliary classes and functions are where most of the code is. A Twisted protocol handles data in an asynchronous manner. This means that the protocol never waits for an event, but rather responds to events as they arrive from the network.

Here is a simple example:

1 2 3 4 5 6

from twisted.internet.protocol import Protocol from sys import stdout class Echo(Protocol): def dataReceived(self, data): stdout.write(data)

This is one of the simplest protocols. It just writes whatever it reads from the connection to standard output. There are many events it does not respond to. Here is an example of a Protocol responding to another event:

1 2 3 4 5 6

from twisted.internet.protocol import Protocol class WelcomeMessage(Protocol): def connectionMade(self): self.transport.write("Hello server, I am the client!\r\n") self.transport.loseConnection()

This protocol connects to the server, sends it a welcome message, and then terminates the connection.

The connectionMade event is usually where set up of the Protocol object happens, as well as any initial greetings (as in the WelcomeMessage protocol above). Any tearing down of Protocol-specific objects is done in connectionLost.

Simple, single-use clients

In many cases, the protocol only needs to connect to the server once, and the code just wants to get a connected instance of the protocol. In those cases twisted.internet.endpoints provides the appropriate API.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

from twisted.internet import reactor from twisted.internet.protocol import Factory, Protocol from twisted.internet.endpoints import TCP4ClientEndpoint class Greeter(Protocol): def sendMessage(self, msg): self.transport.write("MESSAGE %s\n" % msg) def gotProtocol(p): p.sendMessage("Hello") reactor.callLater(1, p.sendMessage, "This is sent in a second") reactor.callLater(2, p.transport.loseConnection) factory = Factory() factory.protocol = Greeter point = TCP4ClientEndpoint(reactor, "localhost", 1234) d = point.connect(factory) d.addCallback(gotProtocol) reactor.run()

Regardless of the type of client endpoint, the way to set up a new connection is simply to call the connect method on it and pass in a factory. This means it's easy to change the mechanism you're using to connect, without changing the rest of your program. For example, to run the greeter example over SSL, the only change required is to instantiate an SSL4ClientEndpoint instead of a TCP4ClientEndpoint. To take advantage of this, functions and methods which initiates a new connection should generally accept an endpoint as an argument and let the caller construct it, rather than taking arguments like 'host' and 'port' and constructing its own before calling connect.

For more information on different ways you can make outgoing connections to different types of endpoints, as well as parsing strings into endpoints, see the documentation for the endpoints API.

Note: If you've used ClientFactory before, make sure you remember that the connect method takes a Factory, not a ClientFactory. Even if you pass a ClientFactory to endpoint.connect, its clientConnectionFailed and clientConnectionLost methods.

You may come across code using ClientCreator, an older API which is not as flexible as the endpoint API. Rather than calling connect on an endpoint, such code will look like this:

1 2 3 4 5 6 7 8

from twisted.internet.protocol import ClientCreator ... creator = ClientCreator(reactor, Greeter) d = creator.connectTCP("localhost", 1234) d.addCallback(gotProtocol) reactor.run()

In general, the endpoint API should be preferred in new code, as it lets the caller select the method of connecting.

ClientFactory

Still, there's plenty of code out there that uses lower-level APIs, and a few features (such as automatic reconnection) have not been re-implemented with endpoints yet, so in some cases they may be more convenient to use.

To use the lower-level connection APIs, you will need to call one of the reactor.connect* methods directly. For these cases, you need a ClientFactory. The ClientFactory is in charge of creating the Protocol and also receives events relating to the connection state. This allows it to do things like reconnect in the event of a connection error. Here is an example of a simple ClientFactory that uses the Echo protocol (above) and also prints what state the connection is in.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

from twisted.internet.protocol import Protocol, ClientFactory from sys import stdout class Echo(Protocol): def dataReceived(self, data): stdout.write(data) class EchoClientFactory(ClientFactory): def startedConnecting(self, connector): print 'Started to connect.' def buildProtocol(self, addr): print 'Connected.' return Echo() def clientConnectionLost(self, connector, reason): print 'Lost connection. Reason:', reason def clientConnectionFailed(self, connector, reason): print 'Connection failed. Reason:', reason

To connect this EchoClientFactory to a server, you could use this code:

1 2 3

from twisted.internet import reactor reactor.connectTCP(host, port, EchoClientFactory()) reactor.run()

Note that clientConnectionFailed is called when a connection could not be established, and that clientConnectionLost is called when a connection was made and then disconnected.

Reconnection

Often, the connection of a client will be lost unintentionally due to network problems. One way to reconnect after a disconnection would be to call connector.connect() when the connection is lost:

1 2 3 4 5

from twisted.internet.protocol import ClientFactory class EchoClientFactory(ClientFactory): def clientConnectionLost(self, connector, reason): connector.connect()

The connector passed as the first argument is the interface between a connection and a protocol. When the connection fails and the factory receives the clientConnectionLost event, the factory can call connector.connect() to start the connection over again from scratch.

However, most programs that want this functionality should implement ReconnectingClientFactory instead, which tries to reconnect if a connection is lost or fails and which exponentially delays repeated reconnect attempts.

Here is the Echo protocol implemented with a ReconnectingClientFactory:

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

from twisted.internet.protocol import Protocol, ReconnectingClientFactory from sys import stdout class Echo(Protocol): def dataReceived(self, data): stdout.write(data) class EchoClientFactory(ReconnectingClientFactory): def startedConnecting(self, connector): print 'Started to connect.' def buildProtocol(self, addr): print 'Connected.' print 'Resetting reconnection delay' self.resetDelay() return Echo() def clientConnectionLost(self, connector, reason): print 'Lost connection. Reason:', reason ReconnectingClientFactory.clientConnectionLost(self, connector, reason) def clientConnectionFailed(self, connector, reason): print 'Connection failed. Reason:', reason ReconnectingClientFactory.clientConnectionFailed(self, connector, reason)

A Higher-Level Example: ircLogBot

Overview of ircLogBot

The clients so far have been fairly simple. A more complicated example comes with Twisted Words in the doc/words/examples directory.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132

# twisted imports from twisted.words.protocols import irc from twisted.internet import reactor, protocol from twisted.python import log # system imports import time, sys class MessageLogger: """ An independent logger class (because separation of application and protocol logic is a good thing). """ def __init__(self, file): self.file = file def log(self, message): """Write a message to the file.""" timestamp = time.strftime("[%H:%M:%S]", time.localtime(time.time())) self.file.write('%s %s\n' % (timestamp, message)) self.file.flush() def close(self): self.file.close() class LogBot(irc.IRCClient): """A logging IRC bot.""" nickname = "twistedbot" def connectionMade(self): irc.IRCClient.connectionMade(self) self.logger = MessageLogger(open(self.factory.filename, "a")) self.logger.log("[connected at %s]" % time.asctime(time.localtime(time.time()))) def connectionLost(self, reason): irc.IRCClient.connectionLost(self, reason) self.logger.log("[disconnected at %s]" % time.asctime(time.localtime(time.time()))) self.logger.close() # callbacks for events def signedOn(self): """Called when bot has succesfully signed on to server.""" self.join(self.factory.channel) def joined(self, channel): """This will get called when the bot joins the channel.""" self.logger.log("[I have joined %s]" % channel) def privmsg(self, user, channel, msg): """This will get called when the bot receives a message.""" user = user.split('!', 1)[0] self.logger.log("<%s> %s" % (user, msg)) # Check to see if they're sending me a private message if channel == self.nickname: msg = "It isn't nice to whisper! Play nice with the group." self.msg(user, msg) return # Otherwise check to see if it is a message directed at me if msg.startswith(self.nickname + ":"): msg = "%s: I am a log bot" % user self.msg(channel, msg) self.logger.log("<%s> %s" % (self.nickname, msg)) def action(self, user, channel, msg): """This will get called when the bot sees someone do an action.""" user = user.split('!', 1)[0] self.logger.log("* %s %s" % (user, msg)) # irc callbacks def irc_NICK(self, prefix, params): """Called when an IRC user changes their nickname.""" old_nick = prefix.split('!')[0] new_nick = params[0] self.logger.log("%s is now known as %s" % (old_nick, new_nick)) # For fun, override the method that determines how a nickname is changed on # collisions. The default method appends an underscore. def alterCollidedNick(self, nickname): """ Generate an altered version of a nickname that caused a collision in an effort to create an unused related name for subsequent registration. """ return nickname + '^' class LogBotFactory(protocol.ClientFactory): """A factory for LogBots. A new protocol instance will be created each time we connect to the server. """ # the class of the protocol to build when new connection is made protocol = LogBot def __init__(self, channel, filename): self.channel = channel self.filename = filename def clientConnectionLost(self, connector, reason): """If we get disconnected, reconnect to server.""" connector.connect() def clientConnectionFailed(self, connector, reason): print "connection failed:", reason reactor.stop() if __name__ == '__main__': # initialize logging log.startLogging(sys.stdout) # create factory protocol and application f = LogBotFactory(sys.argv[1], sys.argv[2]) # connect factory to this host and port reactor.connectTCP("irc.freenode.net", 6667, f) # run bot reactor.run()

ircLogBot.py connects to an IRC server, joins a channel, and logs all traffic on it to a file. It demonstrates some of the connection-level logic of reconnecting on a lost connection, as well as storing persistent data in the Factory.

Persistent Data in the Factory

Since the Protocol instance is recreated each time the connection is made, the client needs some way to keep track of data that should be persisted. In the case of the logging bot, it needs to know which channel it is logging, and where to log it.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

from twisted.words.protocols import irc from twisted.internet import protocol class LogBot(irc.IRCClient): def connectionMade(self): irc.IRCClient.connectionMade(self) self.logger = MessageLogger(open(self.factory.filename, "a")) self.logger.log("[connected at %s]" % time.asctime(time.localtime(time.time()))) def signedOn(self): self.join(self.factory.channel) class LogBotFactory(protocol.ClientFactory): protocol = LogBot def __init__(self, channel, filename): self.channel = channel self.filename = filename

When the protocol is created, it gets a reference to the factory as self.factory. It can then access attributes of the factory in its logic. In the case of LogBot, it opens the file and connects to the channel stored in the factory.

Further Reading

The Protocol class used throughout this document is a base implementation of IProtocol used in most Twisted applications for convenience. To learn about the complete IProtocol interface, see the API documentation for IProtocol.

The transport attribute used in some examples in this document provides the ITCPTransport interface. To learn about the complete interface, see the API documentation for ITCPTransport.

Interface classes are a way of specifying what methods and attributes an object has and how they behave. See the Components: Interfaces and Adapters document for more information on using interfaces in Twisted.

Index

Version: 11.0.0 Site Meter