Writing Servers

  1. Overview
  2. Protocols
  3. Factories

Overview

Twisted is a framework designed to be very flexible and let you write powerful servers. The cost of this flexibility is a few layers in the way to writing your server.

This document describes the Protocol layer, where you implement protocol parsing and handling. If you are implementing an application then you should read this document second, after first reading the top level overview of how to begin writing your Twisted application, in Writing Plug-Ins for Twisted. This document is only relevant to TCP, SSL and Unix socket servers, there is a separate document for UDP.

Your protocol handling class will usually subclass twisted.internet.protocol.Protocol. Most protocol handlers inherit either from this class or from one of its convenience children. An instance of the protocol class might be instantiated per-connection, on demand, and might go away when the connection is finished. This means that persistent configuration is not saved in the Protocol.

The persistent configuration is kept in a Factory class, which usually inherits from twisted.internet.protocol.Factory. The default factory class just instantiates each Protocol, and then sets on it an attribute called factory which points to itself. This lets every Protocol access, and possibly modify, the persistent configuration.

It is usually useful to be able to offer the same service on multiple ports or network addresses. This is why the Factory does not listen to connections, and in fact does not know anything about the network. See twisted.internet.interfaces.IReactorTCP.listenTCP, and the other IReactor*.listen* APIs for more information.

This document will explain each step of the way.

Protocols

As mentioned above, this, along with auxiliary classes and functions, is where most of the code is. A Twisted protocol handles data in an asynchronous manner. What this means is that the protocol never waits for an event, but rather responds to events as they arrive from the network.

Here is a simple example:

from twisted.internet.protocol import Protocol

class Echo(Protocol):

    def dataReceived(self, data):
        self.transport.write(data)

This is one of the simplest protocols. It simply writes back whatever is written to it, and does not respond to all events. Here is an example of a Protocol responding to another event:

from twisted.internet.protocol import Protocol

class QOTD(Protocol):

    def connectionMade(self):
        self.transport.write("An apple a day keeps the doctor away\r\n") 
        self.transport.loseConnection()

This protocol responds to the initial connection with a well known quote, and then terminates the connection.

The connectionMade event is usually where set up of the connection object happens, as well as any initial greetings (as in the QOTD protocol above, which is actually based on RFC 865). The connectionLost event is where tearing down of any connection-specific objects is done. Here is an example:

from twisted.internet.protocol import Protocol

class Echo(Protocol):

    def connectionMade(self):
        self.factory.numProtocols = self.factory.numProtocols+1 
        if self.factory.numProtocols > 100:
            self.transport.write("Too many connections, try later") 
            self.transport.loseConnection()

    def connectionLost(self, reason):
        self.factory.numProtocols = self.factory.numProtocols-1

    def dataReceived(self, data):
        self.transport.write(data)

Here connectionMade and connectionLost cooperate to keep a count of the active protocols in the factory. connectionMade immediately closes the connection if there are too many active protocols.

Using the Protocol

In this section, I will explain how to test your protocol easily. (In order to see how you should write a production-grade Twisted server, though, you should read the Writing Plug-Ins for Twisted HOWTO as well).

Here is code that will run the QOTD server discussed earlier

from twisted.internet.protocol import Protocol, Factory
from twisted.internet import reactor

class QOTD(Protocol):

    def connectionMade(self):
        self.transport.write("An apple a day keeps the doctor away\r\n") 
        self.transport.loseConnection()

# Next lines are magic:
factory = Factory()
factory.protocol = QOTD

# 8007 is the port you want to run under. Choose something >1024
reactor.listenTCP(8007, factory)
reactor.run()

Don't worry about the last 6 magic lines -- you will understand what they do later in the document.

Helper Protocols

Many protocols build upon similar lower-level abstraction. The most popular in internet protocols is being line-based. Lines are usually terminated with a CR-LF combinations.

However, quite a few protocols are mixed - they have line-based sections and then raw data sections. Examples include HTTP/1.1 and the Freenet protocol.

For those cases, there is the LineReceiver protocol. This protocol dispatches to two different event handlers - lineReceived and rawDataReceived. By default, only lineReceived will be called, once for each line. However, if setRawMode is called, the protocol will call rawDataReceived until setLineMode is called, which returns it to using lineReceived.

Here is an example for a simple use of the line receiver:

from twisted.protocols.basic import LineReceiver

class Answer(LineReceiver):

    answers = {'How are you?': 'Fine', None : "I don't know what you mean"}

    def lineReceived(self, line):
        if self.answers.has_key(line):
            self.sendLine(self.answers[line])
        else:
            self.sendLine(self.answers[None])

Note that the delimiter is not part of the line.

Several other, less popular, helpers exist, such as a netstring based protocol and a prefixed-message-length protocol.

State Machines

Many Twisted protocol handlers need to write a state machine to record the state they are at. Here are some pieces of advice which help to write state machines:

Factories

As mentioned before, usually the class twisted.internet.protocol.Factory works, and there is no need to subclass it. However, sometimes there can be factory-specific configuration of the protocols, or other considerations. In those cases, there is a need to subclass Factory.

For a factory which simply instantiates instances of a specific protocol class, simply instantiate Factory, and sets its protocol attribute:

from twisted.internet.protocol import Factory
from twisted.protocols.wire import Echo

myFactory = Factory()
myFactory.protocol = Echo

If there is a need to easily construct factories for a specific configuration, a factory function is often useful:

from twisted.internet.protocol import Factory, Protocol

class QOTD(Protocol):

    def connectionMade(self):
        self.transport.write(self.factory.quote+'\r\n')
        self.transport.loseConnection()


def makeQOTDFactory(quote=None):
    factory = Factory()
    factory.protocol = QOTD
    factory.quote = quote or 'An apple a day keeps the doctor away'
    return factory

A Factory has two methods to perform application-specific building up and tearing down (since a Factory is frequently persisted, it is often not appropriate to do them in __init__ or __del__, and would frequently be too early or too late).

Here is an example of a factory which allows its Protocols to write to a special log-file:

from twisted.internet.protocol import Factory
from twisted.protocols.basic import LineReceiver


class LoggingProtocol(LineReceiver):

    def lineReceived(self, line):
        self.factory.fp.write(line+'\n')


class LogfileFactory(Factory):

    protocol = LoggingProtocol

    def __init__(self, fileName):
        self.file = fileName

    def startFactory(self):
        self.fp = open(self.file, 'a')

    def stopFactory(self):
        self.fp.close()

Putting it All Together

So, you know what factories are, and want to run the QOTD with configurable quote server, do you? No problems, here is an example.

from twisted.internet.protocol import Factory, Protocol
from twisted.internet import reactor

class QOTD(Protocol):

    def connectionMade(self):
        self.transport.write(self.factory.quote+'\r\n')
        self.transport.loseConnection()


class QOTDFactory(Factory):

    protocol = QOTD

    def __init__(self, quote=None):
        self.quote = quote or 'An apple a day keeps the doctor away'

reactor.listenTCP(8007, QOTDFactory("configurable quote"))
reactor.run()

The only lines you might not understand are the last two.

listenTCP is the method which connects a Factory to the network. It uses the reactor interface, which lets many different loops handle the networking code, without modifying end-user code, like this. As mentioned above, if you want to write your code to be a production-grade Twisted server, and not a mere 20-line hack, you will want to use the Application object.

Index

Version: 8.2.0