t.i.s.SerialPort(BaseSerialPort, abstract.FileDescriptor) : class documentation

Part of twisted.internet.serialport View Source View In Hierarchy

A serial device, acting as a transport, that uses a win32 event.
Method __init__ Undocumented
Method serialReadEvent Undocumented
Method write Reliably write some data.
Method serialWriteEvent Undocumented
Method connectionLost Called when the serial port disconnects.
Method _finishPortSetup Finish setting up the serial port.

Inherited from BaseSerialPort:

Method setBaudRate Undocumented
Method inWaiting Undocumented
Method flushInput Undocumented
Method flushOutput Undocumented
Method sendBreak Undocumented
Method getDSR Undocumented
Method getCD Undocumented
Method getRI Undocumented
Method getCTS Undocumented
Method setDTR Undocumented
Method setRTS Undocumented

Inherited from FileDescriptor:

Method writeSomeData Write as much as possible of the given data, immediately.
Method doRead Called when data is available for reading.
Method doWrite Called when data can be written.
Method writeConnectionLost Indicates write connection was lost.
Method readConnectionLost Indicates read connection was lost.
Method writeSequence Reliably write a sequence of data.
Method loseConnection Close the connection at the next available opportunity.
Method loseWriteConnection Undocumented
Method stopReading Stop waiting for read availability.
Method stopWriting Stop waiting for write availability.
Method startReading Start waiting for read availability.
Method startWriting Start waiting for write availability.
Method stopConsuming Stop consuming data.
Method resumeProducing Undocumented
Method pauseProducing Undocumented
Method stopProducing Stop producing data.
Method fileno File Descriptor number for select().
Method _postLoseConnection Called after a loseConnection(), when all data has been written.
Method _closeWriteConnection Undocumented

Inherited from _ConsumerMixin (via FileDescriptor):

Method registerProducer Register to receive data from a producer.
Method unregisterProducer Stop consuming data from a producer, without disconnecting.

Inherited from _LogOwner (via FileDescriptor):

Method logPrefix Override this method to insert custom logging behavior. Its return value will be inserted in front of every line. It may be called more times than the number of output lines.
Method _getLogPrefix Determine the log prefix to use for messages related to applicationObject, which may or may not be an interfaces.ILoggingContext provider.
def __init__(self, protocol, deviceNameOrPortNumber, reactor, baudrate=9600, bytesize=EIGHTBITS, parity=PARITY_NONE, stopbits=STOPBITS_ONE, xonxoff=0, rtscts=0): (source)
Undocumented
def _finishPortSetup(self): (source)
Finish setting up the serial port.

This is a separate method to facilitate testing.

def serialReadEvent(self): (source)
Undocumented
def write(self, data): (source)
Reliably write some data.

The data is buffered until the underlying file descriptor is ready for writing. If there is more than self.bufferSize data in the buffer and this descriptor has a registered streaming producer, its pauseProducing() method will be called.

def serialWriteEvent(self): (source)
Undocumented
def connectionLost(self, reason): (source)
Called when the serial port disconnects.

Will call connectionLost on the protocol that is handling the serial data.

API Documentation for Twisted, generated by pydoctor at 2012-02-14 18:17:43.